Motor - 12 Volts D.C., 1 Terminal, Standard Duty
Pump - 2.0 CC/REV. (.122 CU.IN./REV.)
Relief - Adjustable Relief valve set at 2500 PSI
9/16-18 SAE Relief Valve Drain Port
Endhead - No Endhead, Motor Adapter has (2) 3/8-16 TAP X .38 DEEP MTG. HOLES
Tank - None
Valving - Check Valve
Wiring - 12 VOLT DC TO MOTOR & START SWITCH
3/4-16 SAE Inlet Port
9/16-18 SAE Pressure Port (opposite side)
Unit Performance - 1.3 GPM @ 2000 PSI at 11.7 Volts DC & 230 Amps at 45 CENTISTOKES (200 SSU)
This power unit is intended to be used with remote directional control valving and reservoir. This unit has an adjustable relief valve and outlet check valve. They are designed for applications such as back-up (auxiliary) hydraulic power for truck mounted or other mobile equipment, including emergency power steering for off-highway vehicles, elevated platforms, aerial buckets and manlifts. It can also be used to power material handling functions and other intermittent duty applications. This power unit incorporates a high-low pump for maximum output of oil for a fast extension of the cylinder, as well as a high pressure/low volume flow for the work portion of the cycle. Standard design is 1 phase operation. Air driven, 3 phase designs also available.
For use with single acting spring return cylinders only.
|
Hydraulic Power Units 
